31061
Master Kit Go EFI 2×4 + In-line Fuel Pump
$2,110.99
In stock
This product falls under the following Emissions Category:
WARNING: Hazardous Material Warning Close WARNING: This product can expose you to chemicals including Nickel Acetate, Chromium, Lead, Lead Compounds, Nickel (Metallic), Nickel Compounds, Diisonyl Phthalate (DINP) and Toluene which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Description
Dual Quad EFI made simple with the Go EFI 2×4 625HP with bright aluminum finish self-tuning system combined with the Inline Fuel Pump Fuel Delivery kit. This kit is a bolt-on for the most popular manifolds including the Edelbrock line of dual quad manifolds without any adapters! They fit and look like they belong there because they were designed to fit from the start. Our normally aspirated kits are good thru 625hp but our Go EFI 2×4 Power Adder kit can handle you guys with the bigger cubes and roots superchargers. One throttle body handles all of the brains while the second holds four additional injectors and the IAC motor for idle stability. These can also be used in cross ram and tunnel ram configurations. No boost with these please! Bolt on two of these tough looking throttle bodies and drive your car as the system dials itself into the perfect calibration for all of your driving and weather conditions. If you decide you want to tune for more power or economy, the FiTech touchscreen controller allows quick and easy on the fly adjustments at your fingertips!
The Inline Fuel Pump Fuel Delivery Kit includes an EFI grade 255 L/PH inline external fuel pump that is suitable for engines making up to 600HP. (Note that some of our EFI kits are limited to less than 750HP due to maximum usable injector sizes). This kit also includes 40-feet of EFI grade fuel hose suitable for both the inlet and return lines between the fuel tank and the engine. The kit includes two billet fuel filters. The filters include a 60-micron pre-filter and a 30-micron post filter.
|
Application: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 200 HP up to 650 HP with a dual quad intake manifold. |
|
Replacement for any dual quad carburetors for engines with 200 HP up to 650 HP. |
|
Use the same size air cleaner you would normally use for your dual quad carburetor. |
|
**This kit does not include linkage ** |
Additional information
Weight | 33 lbs |
---|---|
Dimensions | 25 × 19 × 12 in |
Maximum Horsepower: | 625 HP |
Injection Style: | Throttle body |
Timing Control Compatible: | Yes |
Power Adder Compatible: | No |
ECU Included: | Yes |
Fuel Pump Included: | Yes |
Transmission Controller Included: | No |
Metering Style: | Speed density (Map-N) |
Intake Manifold Included: | No |
Intake Section Included: | No |
Throttle Body Mounting Flange: | Dual 4-barrel square bore |
Venturi Quantity: | 8 |
Venturi Diameter (mm): | 43 mm |
Airflow Rate (cfm): | 850 cfm |
Throttle Body Material: | Cast aluminum |
Throttle Body Finish: | Polished |
Injectors Included: | Yes |
Injector Size (lbs/hr): | 80 lbs./hr. |
Calibration Module Included : | Yes |
Wiring Harness Included: | Yes |
Oxygen Sensor Included: | Yes |
Fuel Pump Style: | External fuel pump |
Fuel Pressure Regulator Included: | Yes |
MAP Sensor Included: | Yes |
IAT Sensor Included: | Yes |
TPS Sensor Included: | Yes |
Quantity: | Sold as a kit. |
Universal: | Yes |
Fuel Type: | Alcohol, Gasoline, MethaNol, Flex |
Related products
-
35503
$1,235.99
Go Street 400 HP Cast EFI System With Force Fuel Mini Delivery Master KitIn stock
Add to cart -
71007 Ultimate Tall LS1/LS2/LS6 500HP w/ Trans Control + In-line Fuel Pump Master Kit
$2,283.99In stock
Add to cart -
31003
$1,125.99
Go Street 400HP Cast EFI System With Inline Fuel Delivery Master KitIn stock
Add to cart -
31002
$1,272.99
Go EFI 4 600HP Matte Black EFI System With Inline Fuel Delivery Master KitIn stock
Add to cart