BLOG POSTS

  • Selecting your LS System | Tech Tuesdays | EP26

    By Crystal C | July 6, 2021

    This week on Tech Tuesday we are going to over all of the Ultimate LS Kits to make sure you have the proper kit for your LS swap! Tech Support Email: te******@*******fi.com Tech Support Line: (951)340-2624 option 2 Have a question you want answered? Comment below and it might be our next Tech Tip! Check…

  • Quick Guide: ProCal Software | Tech Tuesdays | EP25

    By Crystal C | June 29, 2021

    This week on Tech Tuesday we are going to do a quick guide on how to take your PC software off of your handheld and load it into your laptop so you can start doing PC tuning, let’s get started! *FITECH PROCAL SOFTWARE IS ONLY AVAILABLE FOR POWER ADDER AND LS SYSTEMS* Tech Support Email:…

  • Choosing Your Throttle Body | Tech Tuesdays | EP24

    By Crystal C | June 24, 2021

    So you have a brand new engine combination and you don’t know which EFI system to put on it. Today we’re going to show you all of our throttle body EFI systems and match the perfect EFI system for your engine! Tech Support Email: te******@*******fi.com Tech Support Line: (951)340-2624 option 2 Have a question you…

  • Common LS Mistakes| Tech Tuesdays | EP23

    By Crystal C | June 16, 2021

    So you’ve installed your Ultimate LS system and you are excited to crank the key for the first time, suddenly it does not start, do you wonder if you missed a step? On today’s Tech Tuesday we are going to go over the common mistakes made with the Ultimate LS System. Tech Support Email: te******@*******fi.com…

  • Install Checklist Part 2| Tech Tuesdays | EP22

    By Crystal C | June 8, 2021

    Today on FiTech’s Tech Tuesday we are going to go over part 2 of the install checklist with Jeremy Schmidt on a 1963 Corvette with our 30003 Go Street EFI 400HP System. This week Jeremy takes this ’63 on the dyno and continues to tune! Tech Support Email: te******@*******fi.comTech Support Line: (951)340-2624 option 2 Have…

  • Install Checklist Part 1| Tech Tuesdays | EP21

    By Crystal C | June 2, 2021

    Today on FiTech’s Tech Tuesday we are going to go over the first part of the install checklist with Jeremy Schmidt on a 1963 Corvette with our 30003 Go Street EFI 400HP System. We will cover timing, fuel pressure, adjust idle screw, and go through some tuning! Next week Jeremy will take this ’63 on…

  • Locking Out A Distributor | Tech Tuesdays | EP20

    By Crystal C | May 27, 2021

    Today on FiTech’s Tech Tuesday Jeremy is going to walk you through locking out a distributor and setting up ignition timing control! Tech Support Email: te******@*******fi.com Tech Support Line: (951)340-2624 option 2 Have a question you want answered? Comment below and it might be our next Tech Tip! Check in every Tuesday for more tips…

  • CAM Selection | Tech Tuesdays | EP19

    By Crystal C | May 19, 2021

    This week on Tech Tuesday we are going to discuss what the CAM selection feature does on FiTech EFI systems. We are going to show you the appropriate kPa for your CAM and you will know which selection is right for your vehicle! Tech Support Email: te******@*******fi.com Tech Support Line: (951)340-2624 option 2 Have a…

  • Nitrous| Tech Tuesdays | EP18

    By Crystal C | May 11, 2021

    This week on Tech Tuesday we’re going to show you the setup if the nitrous features on our power adder systems right here we have our Go EFI 8 1200hp system with the power adder so we’re going to show you the connection of the nitrous and how to tune it in the handheld. Tech…

  • Shift Points and Shift Firmness| Tech Tuesdays | EP17

    By Crystal C | May 5, 2021

    Last week on our 1965 Pontiac Lemans we showed you the setup of a 5.3 liter LS engine with a 4l60e. We got it running and driving but this week we are going to go into the transmission settings and show you how to change the shift points and the shift firmness in the handheld.…