70006
Ultimate LS 500 HP EFI System With Long Runner Cathedral Intake
$1,896.00
FiTech Part Number: 70006
In stock
This product falls under the following Emissions Category:
WARNING: Hazardous Material Warning Close WARNING: This product can expose you to chemicals including Nickel Acetate, Chromium, Lead, Lead Compounds, Nickel (Metallic), Nickel Compounds, Diisonyl Phthalate (DINP) and Toluene which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Description
The Ultimate LS 500 HP EFI System With Long Runner Cathedral Tall LS1/LS2/LS6 500HP Intake Manifold Kit with 92mm Throttle Body is a complete self-tuning induction systems for LS engines designed for the do-it-yourself hot rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from Craigslist tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this intake manifold kit the Ultimate EFI.
|
Application: Intake manifold will fit Cathedral Port LS1/LS2/LS6 heads. | ||||||||
|
Small Block V8 GEN. III/IV LS-based Chevrolet street and performance engines with a 1500-6500 rpm power-band up to 500 HP to the flywheel. | ||||||||
|
|||||||||
|
Intake manifold height is 9 inches. | ||||||||
|
92mm high flow cable operated throttle body sits at 7 degrees. | ||||||||
|
Throttle body will clear any stock truck accessories depending on the type of water pump, if there is truck water pump accessory clearance interference you will need to get a new water pump bracket. | ||||||||
|
|||||||||
|
Optional, not included: throttle cable mounting bracket (FiTech part number 70063) |
Additional information
Weight | 34 lbs |
---|---|
Dimensions | 29 × 17 × 11 in |
Maximum Horsepower: | 500 HP |
Injection Style: | Multi-port |
Timing Control Compatible: | Yes |
Power Adder Compatible: | Yes |
Power Adder Type: | Boost/Nitrous oxide |
ECU Included: | Yes |
Fuel Pump Included: | No |
Transmission Controller Included: | No |
Metering Style: | Speed density (Map-N) |
Intake Manifold Included: | Yes |
Intake Section Included: | Complete |
Intake Material: | Aluminum |
Intake Finish: | Black Anodized |
Engine Block Deck Height: | Standard deck |
Multi-Port Fuel Rails Included: | Yes |
Throttle Body Mounting Flange: | GM LS2 4-bolt |
Venturi Quantity: | 1 |
Venturi Diameter (mm): | 92 mm |
Airflow Rate (cfm): | 1250 cfm |
Throttle Body Material: | Cast Aluminum |
Throttle Body Finish: | Black |
Injectors Included: | Yes |
Injector Size (lbs/hr): | 36 lbs./hr. |
Calibration Module Included : | Yes |
Wiring Harness Included: | Yes |
Oxygen Sensor Included: | Yes |
Fuel Pressure Regulator Included: | No |
MAP Sensor Included: | Yes |
IAT Sensor Included: | Yes |
TPS Sensor Included: | Yes |
Quantity: | Sold as a kit. |
Universal: | No |
Fuel Type: | Alcohol, Gasoline, MethaNol, Flex |
Related products
-
70007
$2,107.00
Ultimate LS 500 HP EFI System With Long Runner Cathedral Intake & Transmission ControlIn stock
Add to cart -
70072
$965.00
Loaded LS1 Aluminum Intake Manifold 750HP KitIn stock
Add to cart -
70066
$483.00
LS1 Tall Aluminum Intake Manifold w/ RailsIn stock
Add to cart -
70073
$965.00
Loaded LS3 Aluminum Intake Manifold 500HP KitIn stock
Add to cart