Description

Boost Your 1967-1972 Chevy Truck Performance with FiTech Fuel Injection Total Package

Transform your 1967-1972 Chevy Truck with the FiTech Fuel Injection System Total Package. These kits are designed to make it easier for classic Chevy owners to upgrade to EFI, enhancing reliability with a single part number.

The new Total Package EFI swap kits feature FiTech’s proven Easy Street 600-horsepower throttle body as the heart of the system, delivering smooth and reliable performance. In addition, the kits include a new direct-fit fuel tank with an internal pump module, a high-pressure internal fuel pump, and a complete steel braided hose kit to get the fuel to the classic gold-finished throttle body. A high-flow serviceable filter and AN-style fittings are also included, making all of the connections for installation a breeze.

The FiTech Fuel Injection System is designed to give your Chevy Truck optimal fuel efficiency and control. With improved acceleration, throttle response, and overall performance, you’ll enjoy a smooth, consistent idle and crisp throttle response. The in-tank fuel pump ensures that your engine always has the fuel it needs to perform at its best.

The FiTech Fuel Injection System is easy to install and comes with all the necessary components. It’s designed for the ultimate driving experience, with self-learning calibration capabilities and built-in diagnostics. This Total Package is the perfect upgrade for your classic 1967-1972 Chevy Truck.

Now with FiTech’s unmatched 3-year limited warranty and everything you need under one part number, it’s never been easier to make the switch to Fuel Injection. Improve your Chevy Truck’s performance with the FiTech Fuel Injection System Total Package and experience the difference!

Kit Features:

30005 FiTech Easy Street 600HP EFI System

With a classic gold finish, this Go Street system may have the looks of a factory carb, but the similarities end there. The pre-programmed assembly bolts right in place on a square-bore intake manifold and requires only a minimum of inputs to fire up. The Easy Street accepts the tach signal from the coil negative, an HEI distributor or from a CD ignition box for simple installation. A fast reacting wideband O2 sensor is supplied to monitor the fuel burn signaling the self-learning technology of the ECU on adjustments to the mixture resulting in smooth performance from idle to high rpm

• Application: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 200 HP up to 600 HP with a 4-barrel intake manifold. For non boosted engines naturally aspirated applications only.
• Replacement for any 4-barrel carburetors for engines with 200 HP up to 600 HP.
• Use the same size air cleaner you would normally use for your 4-barrel carburetor.

Not legal for use on pollution controlled vehicles. This system is designed to be retrofit into vehicles that do not require emission controls.

Features:

• 1 BAR internal MAP sensor.
• Suitable for up to 600hp.
• (4) Flow matched injectors.
• (1) Fan control.
• Built-in pressure regulator.
• Classic carb gold finish.

 

Throttle Body Kit Contents

• (1) Die-cast throttle body.
• (1) O2 bung kit.
• (1) Hand-held controller.
• (1) CTS sensor.
• (1) Hand-held controller cable.
• (1) CTS adapter.
• (1) Windshield mount.
• (1) Mini USB cable.
• (1) 4+2-Pin Connector.
• (1) Return plug.
• (1) O2 sensor.
• (1) Gasket kit.

58048 1967-72 Chevy Truck Frame Mount Gas Tank – Side Fill

• 1963-72 Chevy and GMC Pickup Under Bed Frame Mount Gas Tank
• Side Fill Filler Neck
• Fuel Injection Ready!
• Die Stamped Galvanized Steel then Powder Coated Silver
• Uses aftermarket 5-bolt senders.  Multiple Ohm ranges available to work with factory or aftermarket gauges.  If using tube sender length is 9″.
• EFI style internal baffling with extra large 4.8 liter dual tube baffled fuel tray to prevent fuel pump starvation.
• Available with a 2″ OD Bolt-On 70 degree Filler Neck
• 18 Gallon Capacity
• Size is 32-1/4″ x 20-1/2″ x 9-3/4″ (including the mounting flange)
• Size is 28″ x 20-1/2″ x 9-3/4″  (measured without the mounting flange)

51003 Natural Stainless Steel Hose Kit, 40ft w/ 10 Micron Filter and Check Valve

These fuel line kits are perfect for plumbing your car with beautiful, chemical resistant natural or black stainless steel braided fuel lines. These fuel lines and fittings are perfect for any fuel delivery application where you want to use pump has, methanol, ethanol, or alcohol. Plus they come with the best AN fittings around.

Kit includes 40ft natural stainless steel braided hose with (3) 90 degree -6 fittings, (3) 45 degree -6 AN fittings and (6) straight -6 AN fittings with a 10 micron fuel filter and inline check valve.

60002 Go EFI Throttle body Install Hardware Kit

• Carb Studs
• Aircleaner Reducer 5/16 to 1/4
• 1/2 Inch Throttle Bushing