BLOG POSTS

  • Record and Save a Data Log| Tech Tuesdays | EP14

    By Crystal C | April 13, 2021

    When trying to diagnose one of the symptoms that you’re experiencing with your FiTech EFI system your best option is to record a data log. Today on FiTech’s Tech Tuesday we’re going to go through the steps on how to record and pull a data log off of your handheld so you can email it…

  • REWRITING A CALIBRATION FILE| Tech Tuesdays | EP13

    By Crystal C | April 7, 2021

    There are a few reasons why you may want to reload the calibration file of your FiTech EFI system. Maybe you swapped the cam out on your motor, maybe you’re switching over to a stroker motor, or maybe you want to do a tune on E85. Today we’re going to show you how to reload…

  • Adjusting Target AFR | Tech Tuesdays | EP12

    By Crystal C | April 7, 2021

    Depending on your engine build, whether it’s a mild build or an aggressive build, you may want to change how rich or lean the engine is running. Today we are going to talk about that and show you how to adjust target AFRs on FiTech’s Tech Tuesday! Check in every Tuesday for more tips and…

  • Crank and Warmup | Tech Tuesdays | EP11

    By Crystal C | April 7, 2021

    On this week’s Tech Tuesday we are going to show you the menu Crank and Warm up in FiTech tuning. We’re talking engine temperature, crank fuel, prime fuel multiplier, afterstart, and crank IAC. Pull out your handheld and tune in to see how you can improve your cold start! Check in every Tuesday for more…

  • Adjusting Accel Pump | Tech Tuesdays | EP10

    By Crystal C | April 7, 2021

    Have you ever experienced bogging or hesitations when trying to accelerate with your FiTech EFI system? Today we’re going to show you how to adjust the accel pumps on FiTech’s Tech Tuesday! Check in every Tuesday for more tips and tricks from the FiTech experts! Have a question you want answered? Comment below and it…

  • Understanding and Mounting the O2 Sensor | Tech Tuesdays | EP9

    By Crystal C | March 12, 2021

    Today on FiTech Fuel Injection’s Tech Tuesday we are showing you how to mount the O2 sensor and giving you an understanding of the sensor itself. Wondering how to mount it if you have a single or twin turbo? Questions about mounting it with an LS System? We’ve got you covered! Check in every Tuesday…

  • Servicing Force Fuel | Tech Tuesdays | EP8

    By Crystal C | February 25, 2021

    Today we are servicing our FiTech Force Fuel Delivery Systems, showing you options, and giving you a sneak peek at our new Force Fuel Mini! Check in every Tuesday for more tips and tricks from the FiTech experts! Have a question you want answered? Comment below and it might be our next Tech Tip! Visit:…

  • ProCal Software | Tech Tuesdays | EP7

    By Crystal C | February 25, 2021

    Today we go over the steps of installing the FiTech ProCal Software and the K Line Driver! Stay tuned for helpful installation tips in the end! Check in every Tuesday for more tips and tricks from the FiTech experts! Have a question you want answered? Comment below and it might be our next Tech Tip!…

  • Servicing and Replacing Injectors | Tech Tuesdays | EP6

    By Crystal C | February 25, 2021

    This week on Tech Tuesday we are showing you how to replace and service the injectors in FiTech’s throttle body EFI systems.

  • Ignition Timing Control | Tech Tuesdays | EP5

    By Crystal C | February 2, 2021

    On today’s Tech Tuesday we are going to cover IGNITION TIMING CONTROL! What it is, how it works, and how to set it up. Jeremy will walk you through setting up timing control on the FiTech SBC Chevy C10.

    Have a question you want answered? Comment below and it might be our next Tech Tip!