30254
Go Port 200-550 HP Chevy Big Block Rectangle Port EFI System
$2,023.00
Part Number: 30254
In stock
This product falls under the following Emissions Category:
WARNING: Hazardous Material Warning Close WARNING: This product can expose you to chemicals including Nickel Acetate, Chromium, Lead, Lead Compounds, Nickel (Metallic), Nickel Compounds, Diisonyl Phthalate (DINP) and Toluene which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Description
FiTech BBC Rectangle Go Port EFI fuel injection systems put high performance within the reach of everyone! The innovators at FiTech have taken advantage of the easy throttle body installation and precision fuel distribution of port-style EFI to create a system that is a “Go” for all enthusiasts. Their Go Port packages combine high-flow FiTech throttle bodies (with an integrated ECU). Sensors, a harness, and gaskets are included in the complete kits, along with a hand-held touchscreen tuner with a suction cup windshield-mount. If you think electronic fuel ejection is too complex or expensive to achieve, FiTech will change your mind—and the way your ride performs—with their Go Port EFI system.
FiTech Go Port EFI systems offer:
* Big Block Chevy Rectangle Port Intake Manifold
* 8 High Impedance 36 lb. injectors
* No ECU to mount under your dashboard or on your firewall
* No big holes to drill
* No harnesses draped all over your engine
* Everything is mounted right on the manifold
* Wiring is super-simple–usually no more than four wires to get you up and running
* No laptop required and absolutely no tuning experience necessary
* Designed for applications making at least 6 inches of vacuum at idle1938.60
Kit Contents
- (1) Die-cast throttle body.
- (1) O2 bung kit.
- (1) Hand-held controller.
- (1) CTS sensor.
- (1) Hand-held controller cable.
- (1) CTS adapter.
- (1) Windshield mount.
- (1) Mini USB cable.
- (1) 4+2-Pin Connector.
- (1) O2 sensor.
- (1) Gasket kit.
- (2) Fuel rails
- (8) Injectors
- (1) Aluminum intake manifold
- pro-tuning laptop software
Not Included:
This system needs a fuel delivery system to provide 58 PSI of fuel pressure. A Fuel pump, fuel lines, fuel filter, and fuel pressure regulator are needed for this kit. Below is a list of fuel system components that may be needed.
Part # | Item |
50004 | Go Fuel Force Fuel Surge Tank |
50005 | Go Fuel Dual Pump Force Fuel Surge Tank |
50006 | Go Fuel Force Fuel Mini Surge Tank |
50015 | Go Fuel in Tank Fuel Pump 800 HP Module |
50019 | Go Fuel in Tank Fuel Pump Returnless Module With 2 Inch Fill |
54001 | Go Fuel Tight Fit Regulator with Pressure Gauge |
54002 | Go Fuel Regulator with Pressure Gauge |
51003 | Go Fuel AN-6 Stainless Steel 40 Ft Hose Kit with Filter |
51004 | Go Fuel AN-6 Black Stainless Steel 40 Ft Hose Kit with Filter |
View All Master Kits
___________________________________________________________________________
For FiTech Fuel Injection Tech Videos:
Check in every Tuesday for tips and tricks from the FiTech experts!
Additional information
Weight | 41 lbs |
---|---|
Dimensions | 15 × 16 × 24 in |
Additional information
Weight | 42 lbs |
---|---|
Dimensions | 17 × 16 × 25 in |
Maximum Horsepower: | 550 HP |
Injection Style: | Multi-port |
Timing Control Compatible: | Yes |
Power Adder Compatible: | Yes |
Power Adder Type: | Boost/Nitrous oxide |
ECU Included: | Yes |
Fuel Pump Included: | No |
Transmission Controller Included: | No |
Metering Style: | Speed density (Map-N) |
Intake Manifold Included: | Yes |
Intake Section Included: | Complete |
Intake Material: | Aluminum |
Intake Finish: | Natural |
Engine Block Deck Height: | Standard deck |
Multi-Port Fuel Rails Included: | Yes |
Throttle Body Mounting Flange: | 4-barrel square bore |
Venturi Quantity: | 4 |
Venturi Diameter (mm): | 44 mm |
Airflow Rate (cfm): | 900 cfm |
Throttle Body Material: | Billet aluminum |
Throttle Body Finish: | Black Anodized |
Injectors Included: | Yes |
Injector Size (lbs/hr): | 36 lbs./hr. |
Calibration Module Included : | Yes |
Wiring Harness Included: | Yes |
Oxygen Sensor Included: | Yes |
MAP Sensor Included: | Yes |
IAT Sensor Included: | Yes |
TPS Sensor Included: | Yes |
Quantity: | Sold as a kit. |
Universal: | No |
Fuel Type: | Alcohol, Gasoline, MethaNol, Flex |
Related products
-
30062
$1,916.00
Go EFI 2×4 625HP System Matte BlackIn stock
Add to cart -
37017
$2,299.00
Ultra Port LS 1000 HP EFI Black System With LS3 IntakeIn stock
Add to cart -
30-10-411
$3,241.00
Ultra Port, 1000 HP Chevy Big Block Rectangle Port EFI System, 4150 Flange, Uni Black Finish Throttle Body, 3-Bar TMAPIn stock
Add to cart -
37020
$2,299.00
Ultra Port LS 1000 HP EFI Brilliant System With LS1 IntakeIn stock
Add to cart