30014
Go Port EFI System Standalone

$1,245.60

Part Number: 30014

In stock

California Prop 65 Warning

This product falls under the following Emissions Category:

See Emissions Details

3

WARNING: Hazardous Material Warning Close WARNING: This product can expose you to chemicals including Nickel Acetate, Chromium, Lead, Lead Compounds, Nickel (Metallic), Nickel Compounds, Diisonyl Phthalate (DINP) and Toluene which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Sale!
Go Port EFI System Standalone

Description

The Go Port EFI System Standalone System is here. Imagine if port style EFI was as simple as throttle body style EFI. Having the advantages of easy installation of the throttle body EFI and yet having the precision fuel distribution of port style EFI. FiTech has bridged the gap with the Go Port System. A high-flow FiTech throttle body with the ECU mounted right on it. The standalone kit includes a hand-held controller with touch-screen for easy setup and configuration. This Go Port EFI is a standalone kit without manifold, fuel rails or injectors.

  • Application: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 200 HP up to 1050 HP with a port style intake manifold.

Not legal for use on pollution controlled vehicles. This system is designed to be installed into vehicles that do not require emission controls.

Kit Contents

  • (1) Die-cast throttle body.
  • (1) O2 bung kit.
  • (1) Hand-held controller.
  • (1) CTS sensor.
  • (1) Hand-held controller cable.
  • (1) CTS adapter.
  • (1) Windshield mount.
  • (1) Mini USB cable.
  • (1) 4+2-Pin Connector.
  • (1) O2 sensor.
  • (1) Gasket kit.

This system needs a fuel delivery system to provide 58 PSI of fuel pressure. A Fuel pump, fuel lines, fuel filter, and fuel pressure regulator are needed for this kit. Below is a list of fuel system components that may be needed.

Part # Item
50004 Go Fuel Force Fuel Surge Tank
50005 Go Fuel Dual Pump Force Fuel Surge Tank
50006 Go Fuel Force Fuel Mini Surge Tank
50015 Go Fuel in Tank Fuel Pump 800 HP Module
50019 Go Fuel in Tank Fuel Pump Returnless Module With 2 Inch Fill
54001 Go Fuel Tight Fit Regulator with Pressure Gauge
54002 Go Fuel Regulator with Pressure Gauge
51003 Go Fuel AN-6 Stainless Steel 40 Ft Hose Kit with Filter
51004 Go Fuel AN-6 Black Stainless Steel 40 Ft Hose Kit with Filter

 

View All Master Kits

_________________________________________________________________________

For FiTech Fuel Injection Tech Videos:

Check in every Tuesday for tips and tricks from the FiTech experts!

Additional information

Weight 11 lbs
Dimensions 14 × 11.5 × 7.25 in

Additional information

Weight 12 lbs
Dimensions 15 × 13 × 8 in
Maximum Horsepower:

600 HP
Injection Style:

Multi-port
Timing Control Compatible:

Yes
Power Adder Compatible:

Yes
Power Adder Type:

Boost/Nitrous oxide
ECU Included:

Yes
Fuel Pump Included:

No
Transmission Controller Included:

No
Metering Style:

Speed density (Map-N)
Intake Manifold Included:

No
Intake Section Included:

No
Throttle Body Mounting Flange:

4-barrel square bore
Venturi Quantity:

4
Venturi Diameter (mm):

44 mm
Airflow Rate (cfm):

900 cfm
Throttle Body Material:

Billet aluminum
Throttle Body Finish:

Satin black
Injectors Included:

No
Calibration Module Included :

Yes
Wiring Harness Included:

Yes
Oxygen Sensor Included:

Yes
MAP Sensor Included:

Yes
IAT Sensor Included:

Yes
TPS Sensor Included:

Yes
Quantity:

Sold individually.
Universal:

Yes
Fuel Type:

Alcohol, Gasoline, MethaNol, Flex