30013
Go EFI 8 1200 HP Bright Aluminum Finish System

$1,597.00

Part Number: 30013

In stock

California Prop 65 Warning

This product falls under the following Emissions Category:

See Emissions Details

3

WARNING: Hazardous Material Warning Close WARNING: This product can expose you to chemicals including Nickel Acetate, Chromium, Lead, Lead Compounds, Nickel (Metallic), Nickel Compounds, Diisonyl Phthalate (DINP) and Toluene which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

FiTech Go EFI 8 1200 HP Bright Aluminum Finish System 30013
FiTech EFI Go EFI 8 1200 HP Bright Aluminum Finish System

Description

The Go EFI 8 1200 HP Bright Aluminum Finish (Power Adder Plus)  System is the ultimate system for the serious power builder. This system features 8 high-flow injectors and is capable of fueling 1200HP! The Go EFI 8 1200HP is our top of the line system and comes with all of the data-logging, and pro-tuning software as standard features. Plus the Annular Discharge design is increased to 20 jet streams to handle the monster flow of this unit!

This system is capable of 25lbs of boost right out of the box and can be used in a blow thru turbo or blower application – or on a single roots style supercharger. You can also run a single stage of wet nitrous and control your A/F as well as ignition timing. **This kit is suitable for higher horsepower engines while equally at home on your daily driver 383.***Works from 250-1200HP! ***

  • Application: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 250 HP up to 1200 HP with a 4-barrel intake manifold.
  • Replacement for any 4-barrel carburetors for engines with 250 HP up to 1200 HP.
  • Use the same size air cleaner you would normally use for your 4-barrel carburetor.

Not legal for use on pollution controlled vehicles. This system is designed to be retrofit into older vehicles that do not require emission controls.

Features

  • 2.5 BAR internal MAP sensor.
  • Suitable for up to 1200hp.
  • (8) Flow matched injectors.
  • (2) Fan control.
  • Blower and turbo ready.
  • Support for Nitrous.
  • Built-in pressure regulator.
  • Ignition timing control.
  • Pro-tuning laptop software.
  • Bright Aluminum Finish.

Kit Contents

  • (1) Die-cast throttle body.
  • (1) O2 bung kit.
  • (1) Hand-held controller.
  • (1) CTS sensor.
  • (1) Hand-held controller cable.
  • (1) CTS adapter.
  • (1) Windshield mount.
  • (1) Mini USB cable.
  • (1) 4+2-Pin Connector.
  • (1) Return plug.
  • (1) O2 sensor.
  • (1) Gasket kit.

View All Master Kits

_________________________________________________________________________

For FiTech Fuel Injection Tech Videos:

Check in for tips and tricks from the FiTech experts!

Additional information

Shipping Weight 11 lbs
Shipping Dimensions 14 × 11.5 × 7.25 in

Additional information

Weight 12 lbs
Dimensions 15 × 13 × 8 in
Maximum Horsepower:

1200 HP
Injection Style:

Throttle body
Timing Control Compatible:

Yes
Power Adder Compatible:

Yes
Power Adder Type:

Boost/Nitrous oxide
ECU Included:

Yes
Fuel Pump Included:

No
Transmission Controller Included:

No
Metering Style:

Speed density (Map-N)
Intake Manifold Included:

No
Intake Section Included:

No
Throttle Body Mounting Flange:

4-barrel square bore
Venturi Quantity:

4
Venturi Diameter (mm):

43 mm
Airflow Rate (cfm):

850 cfm
Throttle Body Material:

Cast aluminum
Throttle Body Finish:

Polished
Injectors Included:

Yes
Injector Size (lbs/hr):

80 lb.
Calibration Module Included :

Yes
Wiring Harness Included:

Yes
Oxygen Sensor Included:

Yes
Fuel Pressure Regulator Included:

Yes
MAP Sensor Included:

Yes
IAT Sensor Included:

Yes
TPS Sensor Included:

Yes
Quantity:

Sold individually.
Universal:

Yes
Fuel Type:

Alcohol, Gasoline, MethaNol, Flex