35261
Go EFI 2×4 System (Aluminum Finish) Master Kit w/ Force Fuel, Fuel Delivery System

$2,275.99

Part Number: 35261

In stock

California Prop 65 Warning

This product falls under the following Emissions Category:

See Emissions Details

3

WARNING: Hazardous Material Warning Close WARNING: This product can expose you to chemicals including Nickel Acetate, Chromium, Lead, Lead Compounds, Nickel (Metallic), Nickel Compounds, Diisonyl Phthalate (DINP) and Toluene which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Go EFI 2x4 625 HP Bright Aluminum EFI System With Force Fuel Delivery Master Kit

Description

FiTech Go EFI 2×4 Dual-Quad 625 hp self-tuning fuel injection systems with Force Fuel provide steady fuel to keep your Sunday cruiser, classic, or race car running under the most extreme conditions.

Dual-quad EFI systems handle up to 625 hp and feature a four injectors on each throttle body. They have the ability to change air/fuel ratios and ignition timing on-the-fly. You have the power of a hand-held controller with a touch screen for easy setup and adjustments. Thanks to a multi-bolt pattern, the 2×4 system will bolt onto most intakes, including tunnel rams, cross rams, Edelbrock, Holley, and many factory-style intakes.

FiTech’s all-new Force Fuel system makes the upgrade to FiTech EFI even easier! It mounts under the hood and is fed with the original mechanical or electric fuel pump. The fuel pump then fills the reservoir with a half-gallon of fuel to submerge an internal electric fuel pump—to keep it cool for long life and no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58 psi. Force Fuel then supplies the EFI system with the required high pressure to run at peak performance.

FiTech’s Go EFI 2×4 dual-quad 625 hp EFI system features:

* Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors

* 8GB of data-logging

* Wiring harness for dual-quad installation

* Wet Flow swirl spray annual discharge obtains complete atomization

* Stainless steel polished linkages

* Choice of three fuel inlet connections

* Will work with CDI box, but not required to control timing

* Adjustable fan control switch

* Kit does not include linkage or fuel lines

* Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor

* Designed for applications making at least 6 in. of vacuum at idle

Force Fuel system adds:

* 5 ft. of high-pressure fuel hose

* Serviceable 10-micron fuel filter

* AN fittings

* Return line fitting bung

* Liquid filled gauge

* Dual function bracket for bottom or side mounting

Additional information

Weight 32 lbs
Dimensions 15 × 24 × 15 in

Additional information

Weight 33 lbs
Dimensions 16 × 25 × 16 in
Maximum Horsepower:

625 HP
Injection Style:

Throttle body
Timing Control Compatible:

Yes
Power Adder Compatible:

No
ECU Included:

Yes
Fuel Pump Included:

Yes
Transmission Controller Included:

No
Metering Style:

Speed density (Map-N)
Intake Manifold Included:

No
Intake Section Included:

No
Throttle Body Mounting Flange:

Dual 4-barrel square bore
Venturi Quantity:

8
Venturi Diameter (mm):

43 mm
Airflow Rate (cfm):

850 cfm
Throttle Body Material:

Aluminum
Throttle Body Finish:

Bright aluminum
Injectors Included:

Yes
Injector Size (lbs/hr):

80 lbs./hr.
Calibration Module Included :

Yes
Wiring Harness Included:

Yes
Oxygen Sensor Included:

Yes
Fuel Pump Style:

External fuel pump
Fuel Pressure Regulator Included:

Yes
MAP Sensor Included:

Yes
IAT Sensor Included:

Yes
TPS Sensor Included:

Yes
Quantity:

Sold as a kit.
Universal:

Yes
Fuel Type:

Alcohol, Gasoline, MethaNol, Flex