37858
Go Port SBC Gen 1 Intake 550-1050HP
$2,295.00
Part Number: 37858
In stock
This product falls under the following Emissions Category:
WARNING: Hazardous Material Warning Close WARNING: This product can expose you to chemicals including Nickel Acetate, Chromium, Lead, Lead Compounds, Nickel (Metallic), Nickel Compounds, Diisonyl Phthalate (DINP) and Toluene which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Description
Imagine if port style EFI was as simple as throttle body style EFI. Having the advantages of easy installation of the throttle body EFI and yet having the precision fuel distribution of port style EFI. FiTech has bridged the gap with the Go Port EFI System. We have combined a high-flow FiTech throttle body (with the ECU mounted right on it) together with a high quality port style manifold. Then we installed FiTech brand high-flow injectors mounted in fuel rails. This all combines to become the most advanced self-learning port EFI system on the planet.
NOTE: The Go Port EFI is also available as a standalone kit without manifold, fuel rails or injectors.
Additional information
Weight | 41 lbs |
---|---|
Dimensions | 16 × 15 × 24 in |
Additional information
Weight | 42 lbs |
---|---|
Dimensions | 17 × 16 × 25 in |
Maximum Horsepower: | 1050 HP |
Injection Style: | Multi-port |
Timing Control Compatible: | Yes |
Power Adder Compatible: | No |
Power Adder Type: | Boost/Nitrous oxide |
ECU Included: | Yes |
Fuel Pump Included: | No |
Transmission Controller Included: | No |
Metering Style: | Speed density (Map-N) |
Intake Manifold Included: | Yes |
Intake Section Included: | Complete |
Intake Material: | Aluminum |
Intake Finish: | Natural |
Engine Block Deck Height: | Standard deck |
Multi-Port Fuel Rails Included: | Yes |
Throttle Body Mounting Flange: | 4-barrel square bore |
Venturi Quantity: | 4 |
Venturi Diameter (mm): | 44 mm |
Airflow Rate (cfm): | 950 cfm |
Throttle Body Material: | Cast aluminum |
Throttle Body Finish: | Black |
Injectors Included: | Yes |
Injector Size (lbs/hr): | 80 lbs./hr. |
Calibration Module Included : | Yes |
Wiring Harness Included: | Yes |
Oxygen Sensor Included: | Yes |
Fuel Pressure Regulator Included: | No |
MAP Sensor Included: | Yes |
IAT Sensor Included: | Yes |
TPS Sensor Included: | Yes |
Quantity: | Sold as a kit. |
Universal: | No |
Fuel Type: | Alcohol, Gasoline, MethaNol, Flex |
Related products
-
31062
$2,110.99
Master Kit Go EFI 2×4 Matte Black + In-line Fuel PumpIn stock
Add to cart -
37854
$2,064.00
Go Port 200-550 HP Chevy Small Block Port EFI SystemIn stock
Add to cart -
70064
$483.00
LS1 Cathedral Port Short Aluminum Intake Manifold w/ RailsIn stock
Add to cart -
36221
$1,460.99
Go EFI Classic Black 650 HP EFI System With Go Fuel 340 LPH In-Tank & Go Fuel Tight Fit Regulator Master KitIn stock
Add to cart