N2O Solenoid Control

If the ECU is to be in control of the relay that drives the solenoids, set this accordingly.

...Read more

N2O ENABLED

If the ECU is used with a nitrous system, set this accordingly.

...Read more

N2O Signal Level

If the signal that tells the ECU to enable nitrous is a +12V signal, or a grounding signal, set this value accordingly.

...Read more

N2O Stage1 Retard

Spark advance should be retarded when nitrous is on. How much depends on the engine and nitrous combination.

...Read more

N2O Stage1 AFR

A richer target should be set with nitrous. This is that target when the nitrous is on.

...Read more

N2O Stage1 FUEL

Fuel can be added or subtracted when nitrous is turned on to help get the AFR closer to optimal. Often times, fuel needs to be removed because it d...Read more

Gear Shift time

If the N2O MAX RPM is used to turn off nitrous, this time will delay the reenable of nitrous to allow time for the gear shift to complete.

...Read more

RPM hysteresis

If the RPM fluctuates with nitrous on or off, it won’t flutter on and off unless the RPM varies by this much.

...Read more

N2O MIN RPM

Above this RPM, nitrous will be turned on.

...Read more

N2O MAX RPM

Above this RPM, nitrous will turn off.

...Read more