Want to use a 30004 on a 225 slant six with turbo and direct port meth injection
Want to know if we can use the nitrous controls on the fi tech to operate the meth
We have not tried it here but people have done it. I have never received information back so if you give it a try let us know!
do you have to use the power adder fi tech for nitrous or can you keep it as a stand alone system?
You need a Power Adder kit for use with nitrous.
I’m an using the 30004. The brown nitrous wire never provides a path to ground. Nitrous control is enabled, solenoid driver is enabled. Min tps is set to 90. Min rpm is set to 2500.
If I ground that terminal of my relay manually the nitrous works perfect.
The engine needs to be running to check this but be sure the 12 volt nitrous input wire is getting power and for testing purposes set the TPS setting lower for now. Be aware their are a lot of window settings and you need to refer to the dashboard to verify that the system matches all of them for it to work.
What nitrous kit would you use on a Fitech EFI system Carb plate or EFI fogger kit
Traditionally we would use a wet carb plate nitrous system.
Your email address will not be published. Required fields are marked *
New Tech Support Hours
Ultimate LS Induction System Features & FAQ’s
FiTech EFI – Basic Setup Instructions
FiTech Throttle Body Dimensions
Frequently Asked Questions – EFI General
Frequently Asked Questions – More Q&A
FiTech EFI Fuel Injection System Overview
Instructions for Go EFI Systems
Fuel Command Center Bracket Fitment
Go EFI Pulse Width Modulation Instructions With Pictures
RideTech Transforms a Truck in 48 Hours at Barrett-Jackson
FiTech’s Ken Farrel sits down with Two Guys Garage
PRI 2016- Performance Racing Indianapolis
SEMA 2016: FiTech 360° Sema Experience
SEMA 2016: FiTech Unleashes Ultimate Induction System for LS Engines